Integrating an iPad

The NCR 1668-2000 iPad Stand is used to integrate an iPad on an MGC. The stand is secured with two screws into the top of the MGC.

Note:  The screws to secure the stand are included with the MGC. They are taped to the cabinet in a plastic bag for shipping.

1.

Install the stand on top of the MGC (2 screws).

Note:  There are two sets of screw holes in the top of the MGC, which facilitates mounting the display to face the front or rear of the MGC.

2.

Loosen the thumbscrew on the Display Bracket.

3.

Install the iPad in the spring-loaded Display Bracket. Secure the bracket by tightening the thumbscrew.